Rinnai EX22C (RHFE-559FTA) Manual descargar pdf (Pagina 3)

Rinnai Corporation EX17C / EX22C Conversion Manual 3

Confirm that the inlet gas pressure is between the minimum and maximum pressures allowed for this appliance.

CAUTION

Gain Access

Conversion Procedure

The gas supply shall be shut off prior to disconnecting the electrical power, before

proceeding with the conversion.

1. Turn off the gas and the power supply.

2. Remove the 5 screws that hold the louver

assembly and front panel. Lift the panel straight

up and then remove it.

Replace Components

Refer to the Technical Data and Parts List to ensure to

the correct injectors are installed.

1. Remove the 2 manifold screws. Rotate the

manifold and connecting tube to access the

injectors.

2. Replace the 4 injectors with the proper size for the

gas type to be used.

3. Install the manifold (2 screws).

4. Complete the procedure, Adjust Gas Pressure

Settings.

Screw

locations

Manifold

Injectors

Manifold

screws

1 2 3 4 5 6 7 8 ... 11 12

Sin comentarios

Rinnai EX22C (RHFE-559FTA) Manual Pagina 3