Rinnai RINV70R-A Manual de usuario descargar pdf (Pagina 15)

Rinnai 12 Split AC OM

SAVE A SERVICE CALL

The air conditioner stops running. Check power supply or call Rinnai.

If a power failure has occurred. Turn off the air

conditioner when a power failure occurs. When the

power is restored, wait 3 minutes, and then turn on

the air conditioner.

Check the air conditioner has not been turned off

automatically by a programmed off timer. Press the

power button on the remote control.

The air conditioner does not generate cool / hot air. Air is not circulating properly. Make sure that there

are no curtains, blinds or furniture blocking the front

of the air conditioner.

The air lter is dirty. Clean the air lter once every 2

weeks. See “Cleaning Air Filter” for more information.

The room temperature is too high. In summer, it may

take some time to cool indoor air. In this case, select

the turbo cool operation to cool indoor air quickly.

The desired temperature is higher than the set

temperature. Set the desired temperature to a level

lower than the current temperature.

There is a heating source nearby. Avoid using a heat

generator such as an electric oven or a gas burner

while the air conditioner is in operation

The FAN ONLY mode of operation is selected. In

this mode, air blows from the air conditioner without

cooling or heating the indoor air. Switch the operation

mode to the cooling, heating or auto.

It is not possible to adjust the fan speed. In some operation modes, such as the turbo or

dehumidifying operation modes, you cannot adjust

the fan speed. Select an operation mode in which

you can adjust the fan speed.

It is not possible to adjust the temperature. In some operation modes, such as the auto, fan

only or dehumidifying modes, you can not adjust the

temperature. Select an operation mode in which you

can adjust the temperature.

CARE & MAINTENANCE

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Sin comentarios

Rinnai RINV70R-A Manual de usuario Pagina 15