Rinnai RINV70R-A Guía de instalación descargar pdf (Pagina 10)

1.Please read the instructions carefully before installation of the air-conditioner.

2.The installation should be carried out by only authorised persons.

3.Installation the air-conditioner and connecting the pipes and wires must strictly

follow the instructions

4.The wiring must be done by qualified electrician according to the electrical safety

requirements.

5.The customer should have a qualified power supply which coincides with the tag of

air conditioner, the normal voltage should be in the range of 90-110% of its rated

voltage.

6.The air conditioner must be well grounded, the switch of the main power of air-

conditioner must be reliably grounded.

7. n all-pole switch

must be installed in the fixed wiring in accordance with AS3000 and all local wiring

regulations.

leakage protector must be installed in the

fixed wiring.

9.The power supply circuit should have leakage protector and switch of which the

capacity should be more than 1.5 times of the maximum current.

If your air conditioner is not fitted with a supply cord and a plug, a

If your air conditioner is permanently connected to the fixed wiring and have a

leakage current that may exceed 10 mA,

Guide for customer

Notices

★

1.The air conditioner must be installed on strong supports or surfaces.

2.The appliance shall be installed in accordance with national wiring regulations.

3.Fix the machine firmly, otherwise it will produce abnormal noise and vibration.

4.Install the outdoor unit in the place where it wouldn t disturb your neighbour.

5.The method of connection of the appliance to the electrical supply and inter

connection of separate components, please see the electric connection

wiring diagram label on the machine.

6.If the power supply cord is damaged, it must be replaced by the manufacture

or its service agent or a similar qualified person.

7.After installation, the isolation switch should be easily reached.

Installation Guide

- 8 -

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 18 19

Sin comentarios

Rinnai RINV70R-A Guía de instalación Pagina 10